
Ferrari 599 GTB F140 C 6.0L V12 Engine, Rebuilt
- SKU
- K2Q4Q
- Brand
- Ferrari
This Ferrari 599 GTB F140 C is a 6.0L naturally aspirated V12 engine, a direct derivative of the Ferrari Enzo engine. Rebuilt in 2015 and stored since, it features CP-Carillo pistons and rings, new timing assembly, valves, and gaskets. This engine, now nearing 20 years of age, is recognized as one of the final naturally aspirated Ferrari V12s before the introduction of hybrid technologies.
In stock
Confirm Compatibility Before Ordering
Need to confirm whether this part is suitable for your vehicle? Contact us with your vehicle details and the product name or SKU.
Ask About Compatibility →Overview
The Ferrari 599 GTB F140 C is a 6.0L naturally aspirated V12 engine, directly derived from the powerplant found in the Ferrari Enzo. This unit, engine number 110167, was rebuilt in 2015 and has been stored since. Recognized as one of the last naturally aspirated Ferrari V12s before the era of hybridization and extensive electronic intervention, it represents a significant component for restoration or high-end custom projects. These engines are now nearing 20 years of age.
Key Features
- 6.0-L Quad-Cam V12 engine from a Ferrari 599 GTB
- Rebuilt in 2015 and stored since
- Equipped with CP-Carillo Pistons and Rings
- Features a new Timing Assembly and new Valves
- Includes a 5-Angle Valve Job
- Fitted with new Gaskets and Seals
Technical Details
This F140 C engine carries engine number 110167. For engines of this type, especially those nearing two decades in age, specific maintenance considerations are important. The Variable Valve Timing (VVT) system’s solenoids can be prone to failure, often indicated by a clattering sound at idle, with updated Ferrari solenoids being a common solution. Gaskets and seals, such as the rear main seal and valve cover gaskets, may become brittle over time, and their replacement can require significant disassembly due to the V12’s size and mid-front position. Additionally, the hydraulic engine mounts for the V12 can sag after approximately 15 years, potentially causing the engine to sit lower and risk damage to exhaust manifolds or oil lines.
Associated Components and Trends
When considering an F140 C engine, attention to associated components is advisable. Factory 599 exhaust manifolds are known for internal cracking of heat shielding, which can lead to issues; many owners opt for Inconel or aftermarket stainless headers. The engine’s integration with the F1 SuperFast gearbox requires precise calibration of the clutch PIS (Point of Initial Slip) to the engine’s torque output for smooth operation. A notable trend for this engine in the aftermarket is its suitability for manual conversions, given its shared architecture with the limited factory manual 599 models.
What’s Included
An invoice for the engine is included with the purchase.
Technical Specifications
Only structured information present in this listing is shown.
| Specification | Value |
|---|---|
| Engine Number | 110167 |
| Variators & Solenoids | The Variable Valve Timing (VVT) system is prone to solenoid failure. If you hear a “clattering” at idle, it’s likely a variator issue. In 2026, the updated Ferrari solenoids are the standard fix. |
| Gasket & Seal Deterioration | The rear main seal and valve cover gaskets often become brittle. Because of the V12’s size and position (mid-front), a “simple” gasket change can require significant disassembly. |
| Engine Mounts | The hydraulic mounts for the V12 often sag after 15 years. This can cause the engine to sit low, potentially damaging the exhaust manifolds or oil lines. |
Vehicle Compatibility
Compatibility is not independently verified for this listing.
Contact us with your vehicle year, make, model, and any available part number before ordering.
Ask About Compatibility →


